Exhibitor products

EPA's NF-4-GTR – High performance mains RFI filters for machinery Two-stage enhancement of the EPA NF-4-FTN (single-stage RFI filter) for improved performance ✓ Low leakage current and very high attenuation ✓ Compact case style ✓ For current ratings from 8 A up to 200 A ✓ Three-phase with neutral conductor, two-stage

EPA's NF-CF – Compact filters for frequency inverters and power drive systems Double deck design: high performance with a smaller footprint – reduced length with greater depth ✓ Very small dimensions (bookstyle) ✓ Very good attenuation properties ✓ Current ratings from 10 A up to 230 A

EPA's NF-DAR / NF-KC-DAR - the Leakage current reduction filters with and without internal EMC filter ✓ For suppression of unwanted leakage currents ≥ 2 kHz ✓ Increases the safety for devices with an RCD ✓ EMC improvement ✓ For nominal currents up to 800 A

EPA's PECON+® is used for protective conductor monitoring for single-phase and three-phase power grids. ✓ For use of frequency inverters and servo drives ✓ The 3.5 mA limit may be exceeded according to the following standards: • DIN EN IEC 62477-1 / VDE 0558-477-1 (AC 3.5 mA limit for electronic equipment) • DIN EN 61800-5-1 / VDE 0160-105 (AC 3.5 mA limit for power drive systems) • DIN EN 60204-1 / VDE 0113 (AC 10 mA limit for machines) ✓ For networks with rated voltages of 230 VAC up to 400 VAC with or without neutral

EPA's NF-KC-LKY - Line filters with PreLEAK® TECHNOLOGY for a safe operation on the RCD ✓ Unique technology worldwide ✓ No faulty RCD trippings while switching machines and systems on or off ✓ No faulty RCD trippings while connecting and disconnecting the CEE plug ✓ Very good attenuation properties

EPA's RCCB Type B / B+ from EPA - the AC/DC-sensitive residual current circuit breaker with special characteristic for drive technology ✓ Tripping frequency response for the protection of systems with frequency inverters ✓ Rated residual current 30 mA for contact protection according to the selection recommendations of DIN VDE 0100-530 ✓ Rated residual current 0.3 A for fire protection according to the guidelines of VDS 3501 ✓ Safety through detection of smooth DC residual currents and AC residual currents up to 150 kHz

Ensure with electronic protection devices reliable protection of standard components of industrial automation applications. With a protected application, each load is protected and operated individually to enable easy and fast troubleshooting. The devices feature the lowest power loss on the market and an impressive performance in severe conditions. From 0.5 to 12 A in a 25mm device, seamless expandability, front-top wiring, and easy integration with most ABB devices for a consistent and affordable portfolio. Main benefits: - Compact size to reduce required space in cabinets - Energy efficient: lowest power loss - Save time with push-in terminals and easy expansion with jumpers  - Certified product for global use (UL 508 listed)

The Epson LS-B series is both powerful and cost-effective with its performance, as well as with its low acquisition and operating costs. The Epson LS-B 4 axis robot (including a controller) is a worthwhile investment and is designed to work in environments, which were typically reserved for linear systems, or other less flexible machines. Advantages at a glance - Batteryless encoder - Space and energy saving - New top-of-arm layout - Built-in camera cable - Reduced cable height Batteryless encoder Minimise downtime and reduce overall cost of ownership. Built-in camera connector It all comes integrated with an RJ45 Ethernet connector for easy vision system setup. User-friendly top-of-arm layout An extra ethernet port and screw holes make for easy top of arm equipment mounting and welcome extratime saving. Everything is spaced out for easier than ever access. Reduced cable height The space-saving, compact design cuts cabling down to size: ideal for hard to reach work cell layouts.

A robot for every application Introducing the Epson ProSix C-series: six-axis robots with the range and load capacity for every application – and precision as standard. With a large range, you’ll find one perfectly suited to your needs. Whatever your industry, the Epson ProSix C-series robots are equal to the challenge. Marked out by their slim, compact design, they can work with maximum precision even at high speeds, thanks to our QMEMS® sensor technology. Fast, sleek, precise operation If you’re looking for a robot that can work in confined spaces, often in conjunction with other robots, and is accurate even when time is short, you’re looking in the right place. The Epson C-series can help your system reach its full potential. The six-axis machines work at high speeds with precise path behaviour, all in an ultra-slim body. The variety of assembly options gives you all the flexibility you need.

With over 300 variations, arm lengths from 175 mm to 1,000 mm, load capacities from 1 kg up to 20 kg and a range of installation types and protection classes, Epson’s range of SCARA robots (Selective Compliance Assembly Robot Arm) provides the high performance and reliability that Epson robots are famous for. Designed for virtually any application and perfect for an economical automation solution.

Ideal for pick-and-place applications Intelligent, efficient and cost-effective, the comprehensive T-Series range is designed to make simple pick-and place applications run more smoothly. These 4-axis robots are the ideal automation solution where linear systems are used. Benefits of the T-Series at a glance: - Flexibility: the 4-axis robot provides a great range of motion - Intelligence: powerful, integrated controller and system connection - Efficiency: simple cabling for easy operation and maintenance - Energy-saving: low power consumption - Space-saving: very small footprint, which includes the controller - Sustainability: battery-free position sensor

Compact, easy-to-use and affordable Maximum usability for simple tasks Automate your simple, repetitive material handling tasks and allow your team to concentrate on more creative work. Engineered for maximum usability, with a low total cost of ownership (TCO), the VT6-L is ideal if you’re looking for an affordable solution to non-automated tasks – especially within the automotive, medical and electronics sectors. Simple to set up, easy to integrate As the first model in the Epson VT series to offer the all-in-one concept, you can plug in and begin even if you have limited robot installation experience. Designed with simplicity and flexibility in mind, the VT6-L can be integrated easily into a variety of environments and scenarios – from machine tending to packing and placement. With a range of 900mm and a payload of up to 6kg, the VT6-L can accommodate low volume production with a high mix of repetitive tasks. It’s perfect if you’re looking to take the first step towards automation or are looking to downsize existing machinery

Horizontal and vertical control cabinet mounting on a table