Exhibitor products

Bopla offers engineering, manufacturing and customizing of innovative enclosure systems, membrane keyboards, electronic subunits and entire system solutions incorporating longtime experience. This manufacturer offers 100-percent quality and top-notch service. The different BOPLA enclosures and input devices are available at the authorized BOPLA Distributor Börsig. In addition, customer-specific enclosures can be made. The insertion of input devices into the enclosures is also possible.

A unique product that many engineers have been waiting for: a sophisticated closure system and IP68 as standard are only two of the advantages that the installers love.

Your demands on cable protection are rightly high. In addition to protection against external conditions such as temperature, dirt and impact, handling and installation must remain simple and convenient. A requirement that our Brace® system made of plastic and metal meets.

More than 45 years of experience in design and production of electromagnetic components with solutions for secure holding, starting or stopping. ELECTROMAGNETIC CLUTCHES AND BRAKES FROM COMBINORM 0.5 Nm UP TO 750 Nm Single-surface elements with asbestos-free friction linings for backlash-free torque transmission without residual torque at short switching times. SPRING-APPLIED BRAKES COMBISTOP FROM 1 Nm UP TO 3,000 Nm Double-surface brakes with adjustment of air gap. Asbestos-free friction linings with steel inserts warrant the highest level of safety and protection even under extreme stress. PERMANENT MAGNET BRAKES COMBIPERM FROM 0.4 Nm UP TO 145 Nm SmCo / NeFeB magnets for high braking torques within a small building volume for the backlash-free holding of positions. Residual torque-free separation for large maximum air gaps with large release window. CLUTCH-BRAKE COMBINATIONS COMBIBOX FROM 7 Nm UP TO 250 Nm Ready-to-install clutch-brake combination in a housing for the start / stop operations. The patented adjustment procedure of the air gap allows for wear adjustment without disassembly.

BLDC motors are used wherever the requirements for service life, interference suppression or noise are high and may not be met by brushed DC motors. Advantages of our BLDC motors: • Long lifetime • High efficiency • Good electromagnetic compatibility (EMC properties) • Silent operation • Solutions for operating points at high and low speeds • Can be easily combined with encoders Our BLDC motors are available in different motor versions and customer-specific attachments • Input (connector, soldering pads, metal contacts, ...) • Encoders (optical, magnetical, Hall-sensors) • Gear boxes and bearings • Rotor (inner/outer runner, frameless) • Slotless or slotted • Output (D-cut, double D-cut, pinion, round shaft) and custom-specific adaptations (winding, speed and torque, insulation class, service life, mechanical interfaces, ...).

Bulgin, a Global Connectivity Consultancy that is widely recognised as a leading manufacturer of environmentally sealed connectors and components. With over 95 years of experience in the industry, our vision is to continue to innovate and develop products and services to cater for our global customer base across a variety of markets. The Electronic-Distributor Börsig is authorized sales-partner of Bulgin since 2017.

The insulators are unbreakable and have electrical and mechanical properties that allow them to be used even under difficult working conditions, such as at high room temperatures, in contact with corrosive substances, during vibrations, and so on. They are made from red polymer glass-polyester material, reinforced with glass fibre, and are self-extinguishing. The hexagonal middle layer with two opposite sides makes attaching and engaging the insulator easier. On request, the insulators can also be supplied in the following designs: – With a thread not conventionally used in mass production – With one or two “GB” threaded bolts

Float switch made of VA in an aluminium bypass housing is a high-quality measuring and control device for the reliable monitoring of fill levels. The medium (e.g. water, oil or chemicals) enters the bypass via an inlet and outlet opening, whereby the liquid level in the bypass corresponds exactly to that in the main tank. This means that the measurement can be carried out independently of the turbulent flow behaviour or mechanical installations in the main tank, which enables interference-free and more precise detection. The high-quality stainless steel offers high corrosion resistance and robustness. This makes these switches ideal for use in demanding and harsh industrial environments.

Cable & Wire for control, data, engine and motor encoder application. Branches: medical technology, optoelectronics, stage technology, welding technology, vehicle construction and many more.

Discover the STANDARD MS EMV-Profi (M) cable gland, an innovative and efficient solution for your cable management needs. This cable gland, made from high-quality, nickel-plated brass, offers patented 360° contact that does not damage the shielding braid and is ideal for intermediate connections. It is gas and water-tight and continuously equipped with twist protection, providing optimal strain relief through clamping lamellae. The STANDARD MS EMV-Profi (M) cable gland is designed for a temperature range of -40 to +100 °C and meets the IP68 protection standard, making it an excellent choice for a variety of applications. Its EMC version offers additional protection against electromagnetic interference, making it particularly suitable for use in electrical engineering, mechanical engineering, or automation technology. Whether in industry, mechanical engineering, or electrical engineering – the STANDARD MS EMV-Profi (M) cable gland offers a reliable and secure solution for your cable management. Its ease of use and high-quality material make it an indispensable component in any professional equipment. Choose the STANDARD MS EMV-Profi (M) for an efficient, safe, and long-lasting solution in your professional application.

Die Jacob GmbH in Kernen produziert Kabelverschraubungen aus Kunststoff, Messing und Edelstahl. Die Marke Jacob steht seit 1922 für Qualität und Zuverlässigkeit bei Komponenten für die Kabeleinführung in der Elektrotechnik. Mit der Einführung der Hutmutter-Verschraubung hat Jacob in den 90er Jahren die Kabelverschraubung deutlich weiterentwickelt. Unsere Kabeleinführungen sind leicht zu montieren, bieten hohe Schutzarten und sind besonders langlebig. Wir bieten ein breites Sortiment für Anwendungen in allen Branchen: UV- und wetterbeständige Verschraubungen, Biegeschutz, Zugentlastung, EMV – alles kein Problem.

In der Herstellung von Drehteilen aus Metall hat die Jacob GmbH über 100 Jahre Erfahrung. Am Standort Kernen bei Stuttgart werden Kabelverschraubungen und Zubehör aus Messing, bleifreiem Messing und Edelstahl produziert. Das breite Sortiment aus Metall umfasst EMV-Kabelverschraubungen, Ex-Kabelverschraubungen und Optionen mit Biegeschutz, Zugentlastung und Druckausgleich. Mit dem Zubehör wie Reduktionen, Erweiterungen und Adaptern decken wir viele Größen in Pg- und NPT-Gewinden ab. Metrisch decken wir von M8 bis M110 ab.

Wide range of ATEX/IECEX approved Ex e and Ex d Cable glands for unarmoured and armoured cables

Colored, heat-resistant, UV-stabilized, reusable, with labeling field - THULESIUS has the right cable tie for your application.