Exhibitor products

Software development for automation and special machines - Tailor-made solutions for your machine control system In our software department, we develop specialized software solutions for your automation and special machines. With customized software, we ensure that your machines work efficiently and reliably, regardless of whether they are PLC-controlled systems or complex applications on Linux or Windows platforms. We offer solutions for the precise control and monitoring of your machines. Our service portfolio ranges from the development of control software for PLC systems (e.g. Beckhoff, Siemens) to user-friendly HMI and SCADA systems that make it easy to operate your machines. Our software solutions integrate seamlessly into your existing systems and improve the efficiency of your production processes. Our services at a glance: >> PLC programming: We develop customized control software for common PLC systems (Beckhoff, Siemens) to ensure precise control of your machines. >> Software for special machines: We create individual software solutions for special machines that are tailored to your specific requirements. >> Cross-operating system applications: Our software runs on both Linux and Windows platforms and adapts flexibly to your infrastructure. >> User-friendly interfaces: We develop intuitive HMI and SCADA systems that enable simple operation and efficient machine monitoring. >> System integration and networking: We integrate our software solutions into your production environment and ensure that all machines communicate with each other, including via IoT technologies. >> Long-term support: After commissioning, we offer regular maintenance and updates to keep your software up to date.

Software products for sensors make it easy to set up and parameterize single or multiple sensors from a central controller. They also make it possible to carry out instrument-independent calculations, maintain sensors remotely, and provide remote access to equipment in the event of support.

Programmable logic controllers are used in all industrial environments. On a digital basis and depending on the make, we create the appropriate software and, if desired, the appropriate visualization. Our trained specialists use the following PLC brands: - Siemens - Beckhoff - Rockwell - B&R - visualization: wonderware touch, winCC and Zenon Of course we also use bus systems, preferably Profibus or Profinet.

machine simulations, robotics, or magnetic levitation technology. functional, economical, and unique.

CMS Automatisme designs and builds custom machinery. We offer complete solutions: robot cells or linked automated production lines, all manufactured at our facility. Our engineers and technicians in our mechanical and automation & software design offices provide technical support to define and implement your requirements for custom machinery, automation, and robotics. Our dedicated and skilled automation technicians program industrial robots and cobots from various brands (ABB, FANUC, KUKA, STÄUBLI, Universal Robots, etc.). As custom machine builders, we thus complete our range of services. Our mechanical design office is responsible for the design of your custom machine, and our automation technicians then program robot cells and complete production lines. Our automation engineers program the PLC controller (Siemens, Schneider Electric, Beckhoff), industrial and collaborative robots using the appropriate programming languages ​​depending on the interface. With optimized robot path design, we guarantee improved productivity. Our technicians will advise you on choosing the right robot to deliver a high-performance machine.

HELDELE delivers customized solutions in special-purpose machine construction. Our systems combine mechanics, electrical engineering, and control technology into sophisticated, integrated systems. This allows you to benefit from the agility of a specialized mechanical engineering company and the expertise of an experienced automation technology provider.

Like a spider in its web A unique four-axis design makes the Epson Spider extremely compact and incredibly fast. Its outstanding precision means it can reach 100% of the positions in its action field, offering you everything you need for efficient production. Closing the gap The tool axis is positioned centrally over the production area, allowing the Epson Spider to reach with ‘short cut’ movements, every point of the cylindrical work area directly, whilst requiring very little space. In conventional SCARA robots, the work area design is kidney shaped, known as ‘dead space’ and an outward robot arm orientation means that travel paths are longer. The Epson Spider does not have any dead space, resulting in more efficient and productive travel paths.

Our SPRINT® system is constantly being developed further through an active exchange with our customers and has been convincing for more than 30 years as an efficient and reliable system for the most versatile areas of application.

Push in, fasten from the outside, ready: No thread or need to open an enclosure. Suitable for wall thickness up to 4.0 mm and available as part of our SPRINT system with various cap nut options as well as multiple and special sealing inserts.

ST series safety sensors are suitable for the monitoring of protective devices on machines without inertia and allow the system in which they are used to reach a safety category up to SIL 3, PL e and Category 4. These sensors use RFID technology and provide high protection against any manipulation thanks to a unique code transmitted by the actuator. Since they have no mechanical elements, they guarantee a long service life even in applications with frequent operating cycles and under harsh environmental conditions. Their protection degree is rated IP67 and IP69K and they mantain the maximum safety level PL e, even when connecting up to 32 sensors in series. It is possible to choose among 3 kinds of actuators with different fixing and actuating directions. This means that the sensors can be installed on all types of machines and guards, both large and small.

„Our new stainless steel profile enclosure combines high demands as to design, flexibility and functionality", says Wolfgang Zoll, sales manager of Georg Schlegel GmbH & Co. KG. The enclosure is based on a robust square profile made of 2VA stainless steel with a wall thickness of 2 mm and has been designed in a way that no screws are visible on the enclosure front side. The small-sized construction in a width of 40 mm exactly fits to each standard profile rail so that there is no overlapping and both - the enclosure and the profile rail - become a perfect unit. Besides, the stainless steel enclosure blends in harmoniously into different applications thanks to its reduced space saving height of only 40 mm. Also, relating to the mounting onto the profile rail the new solution scores: It just has to be put on and is being fixed by slot nuts with self-locking screws. In case a direct mounting to the wall is required, Schlegel also offers suitable solutions. For the equipment of the enclosure with 1 - 6 actuators customers can choose from the whole Shortron control unit range. The assembly is done by Schlegel in-house, upon delivery the stainless steel enclosure just has to be mounted to the profile rail. For the optimum adaption to individual requirements Schlegel is offering two connecting systems: For enclosures with 1 - 3 actuators via M12 connector and for those ones with 4 - 6 actuators with cable gland. The access to the enclosure is given via the bottom of the housing. Customised versions On request, Schlegel offers the new enclosure concept with customised equipment. Also in this case customer can choose from the whole Shortron control unit range. Beside the standard of up to 6 actuators it is also possible to get a versíon with more than 6 actuators, also in customised designs - up to a maximum length of 100 cm is possible. As an alternative, an additional enclosure concept with an extremely small size of 20 mm is planned.

Drives with the CM2H.. stainless steel servomotors have been specially designed for use in applications in the food industry, beverage production, and pharmaceutical industry. These are three industries with extremely high hygiene and cleanability requirements. Whether for aseptic filling systems for milk products or beverages, cutting machines for sausage or cheese, or filleting machines for fish or meat: SEW-EURODRIVE represents top-notch flexibility, longevity, and reliability. No edges and corners: Your solution for the highest hygiene standards Our stainless steel servo gearmotors from the PSH..CM2H.. series with a hygienic design meet the strict guidelines of the European Hygienic Engineering Design Group (EHEDG) and the U.S. Food and Drug Administration With a roughness below 0.8 µm and radii greater than 3 mm, the servo drives' housings have an exceptionally smooth surface and neither have rough edges nor any horizontal surfaces. Due to this high demand for longevity and easy cleanability, the compact units consisting of the synchronous servomotor and planetary gear unit are resistant against hot steam and corrosive cleaning agents As a result, they are perfectly suited for clean-in-place (CPI) and sterilization-in-place (SIP) processes. With the intention of making them quickly and easily cleanable, the stainless steel servo gearmotors were developed to withstand high-pressure cleaning, even at high temperatures and with chemical cleaning agents. The drives reach a degree of protection of IP69K.